Assessment of the Effect of Predictive Maintenance on the System Reliability

Authors

  • Alexandre Santos Francisco Escola de Engenharia Industrial Metalúrgica de Volta Redonda, Universidade Federal Fluminense, Volta Redonda, Brasil https://orcid.org/0000-0001-9504-824X
  • Marcos Vinícius Cardoso Lacerda Escola de Engenharia Industrial Metalúrgica de Volta Redonda, Universidade Federal Fluminense, Volta Redonda, Brasil
  • Luis Alberto Duncan Rangel Escola de Engenharia Industrial Metalúrgica de Volta Redonda, Universidade Federal Fluminense, Volta Redonda, Brasil https://orcid.org/0000-0003-1431-9859

DOI:

https://doi.org/10.14295/vetor.v34i1.17320

Keywords:

System reliability, Predictive maintenance, Aging effects

Abstract

In this work, we assess the effect of predictive maintenance on the reliability of repairable systems. In reparable systems, the reliability assessment considering corrective and preventive maintenance is well defined, but not considering predictive one. The effect of predictive maintenance is taken into account through a finite probability that the system is found in degraded condition. If the predictive maintenance evidences the degradation, then the repair is carried out. All the repairs are considered perfects, which means that the system is restored to an as-good-as-new condition each time the repair is carried out. The measure of system reliability under predictive maintenance is found to be between that of a maintenance-free strategy and preventive maintenance. The effect on the system reliability depends on the value of the probability that the system is found in degraded condition. We propose an expression for the reliability that is convenient when values of such probability are less than 15%. By using the proposed expression, one can estimate how much improvement in reliability any system gains by the predictive maintenance.

Downloads

Download data is not yet available.

References

F. S. Fogliatto, and J. L. D. Ribeiro, Confiabilidade e Manutenção Industrial, São Paulo, Brazil: Elsevier, 1st ed., 2011 (in Portuguese).

J. F. B. Souza, M. A. G. Tarouquela, M. P. Motta, and A. L. F. Boa, “Análise das falhas de equipamentos e a proposição de um plano de manutenção: Um estudo de caso em uma confecção,” in XL Encontro Nacional de Engenharia de Produção, Foz do Iguaçu, Brazil, 2020 (in Portuguese).

M. Rocco, “Planejamento Industrial: Um Estudo Sobre Tomada de Decisão na Manutenção,” Specialization Monograph, Universidade Tecnológica Federal Do Paraná, Ponta Grossa, Brazil, 2012 (in Portuguese).

W. E. Andrade, E. B. M. Meza, D. S. Vianna, and M. F. D. Vianna, “A Importância da Manutenção na Indústria do Petróleo & Gás,” in XL Encontro Nacional de Engenharia de Produção, Foz do Iguaçu, Brazil, 2020 (in Portuguese).

C. F. Nogueira, L. M. Guimarães, and M. D. B. Silva, “Industrial Maintenance: Implementation of Total Productive Maintenance (TPM),” E-xata, vol. 5, pp. 175-197, 2012.

A. Kardec, and J. Nascif, Manutenção: Função Estratégica, Rio de Janeiro, Brasil: QualityMark, 5th ed., 2019 (in Portuguese).

A. F. S. Neto, “Elaboração de um Plano de Manutenção para motores elétricos de uma planta fabril,” Undergraduate Course Conclusion Monograph, Centro de Engenharia Elétrica e Informática, Universidade Federal de Campina Grande, Campina Grande, Brazil, 2018 (in Portuguese).

G. S. Menezes, M. M. N. Santos, and G. K. D. Chaves, “The Pilar Planned Maintenance of the Total Productive Maintenance (TPM): Reliability Centred Maintenance Application,” Revista Gestão Industrial, vol. 11, no. 4, pp. 01-35, 2015. Available at: https://doi.org/10.3895/gi.v11n4.3004

J. P. Barbosa, “Modelagem da confiabilidade de equipamentos por combinações ou extensões de distribuições de Weibull,” Master Dissertation, Mechanical Engineering Program, Universidade Federal do Espírito Santo, Vitória, Brazil, 2008 (in Portuguese). Available at: https://sappg.ufes.br/tese_drupal//tese_4902_JO%C3O%20PAULO%20BARBOSA.pdf

D. S. Cerveira, and M. A. Sellitto, “Reliability Centered Maintenance (RCM): Quantitative analysis of an induction electric furnace,” Revista Produção Online, vol. 15, no. 2, pp. 405-432, 2015. Available at: https://doi.org/10.14488/1676-1901.v15i2.1615

J. F. B. Souza, M. A. G. Tarouquela, M. P. Motta, and A. L. F. Boa, “Análise das falhas de equipamentos e a proposição de um plano de manutenção: Um estudo de caso em uma confecção,” in XL Encontro Nacional de Engenharia de Produção, Foz do Iguaçu, Brazil, 2020 (in Portuguese).

E. E. Lewis, Introduction to Reliability Engineering, New York, USA: John Wiley and Sons, 2nd ed., 1996.

M A. Sellitto, M. Borchardt, and D. R. C. Araújo, “Manutenção Centrada em Confiabilidade: Aplicando uma abordagem quantitativa,” in XXII Encontro Nacional de Engenharia de Produção, Curitiba, Brazil, 2002 (in Portuguese).

D. R. Freitas, L. H. Maria, P. V. Santana, and V. M. C. Gomes, “Análise do Planejamento da Gestão da Manutenção de carregadeiras: Um estudo de caso em uma mineradora,” in XL Encontro Nacional de Engenharia de Produção, Foz do Iguaçu, Brazil, 2020 (in Portuguese).

S. Eriksen, I. B. Utne, and M. Lützen, “An RCM approach for assessing reliability challenges and maintenance needs of unmanned cargo ships,” Reliability Engineering and System Safety, vol. 210, pp. 107550, 2021. Available at: https://doi.org/10.1016/j.ress.2021.107550

C. S. Syan, and G. Ramsoobag, “Maintenance applications of multi-criteria optimization: a review,” Reliability Engineering and System Safety, vol. 190, pp. 106520, 2019. Available at: https://doi.org/10.1016/j.ress.2019.106520

M. K. Dixit, “Life cycle recurrent embodied energy calculation of buildings: A review,” Journal of Cleaner Production, vol. 209, pp. 731-754, 2019. Available at: https://doi.org/10.1016/j.jclepro.2018.10.230

S. Bressi, J. Santos, and M. Losa, “Optimization of maintenance strategies for railway track-bed considering probabilistic degradation models and different reliability levels,” Reliability Engineering and System Safety, vol. 207, pp. 107359, 2021. Available at: https://doi.org/10.1016/j.ress.2020.107359

J. J. M. Jimenez, S. Schwartz, R. Vingerhoeds, B. Grabot, and M. Salaün, “Towards multi-model approaches to predictive maintenance: A systematic literature survey on diagnostics and prognostics,” Journal of Manufacturing Systems, vol. 56, pp. 539-557, 2020. Available at: https://doi.org/10.1016/j.jmsy.2020.07.008

D. Kimera and F. N. Nangolo, “Predictive maintenance for ballast pumps on ship repair yards via machine learning,” Transportation Engineering, vol. 2, pp. 100020, 2020. Available at: https://doi.org/10.1016/j.martra.2020.100003

D. W. D. Coit and E. Zio, “The evolution of system reliability optimization,” Reliability Engineering and System Safety, vol. 192, pp. 106259, 2019. Available at: https://doi.org/10.1016/j.ress.2018.09.008

E. S. Seixas, “Determinação do intervalo ótimo para manutenção: Preventiva, Preditiva e Detectiva,” Technical Report, Reliasoft Brasil, 2001 (in Portuguese).

Downloads

Published

2024-07-25

How to Cite

Francisco, A. S., Cardoso Lacerda, M. V., & Duncan Rangel, L. A. (2024). Assessment of the Effect of Predictive Maintenance on the System Reliability. VETOR - Journal of Exact Sciences and Engineering, 34(1), 94–102. https://doi.org/10.14295/vetor.v34i1.17320

Issue

Section

Articles